EAM-T46

eam-raft

APPROVALS

USA: FAA TSO-C70a, Type I
Australia: CAA CAO 103.15
China: CAAC-AAD
Europe: EASA ETSO 2C70a, Type I
Germany: LBA 40.320
Japan: JCAB CARJ Article 152
Canada: 6500-18-14 (C) (AARCBF)

- For Commercial Airlines and Air Cargo use
- Twin tube
- Compact, lightweight. Constructed of neoprene coated nylon
- High tech inflation system
- Competitively priced

PART NUMBER: R0202AXXX

SPECIFICATIONS

Capacity

Rated: | Overload: 69 Persons

Approval

USA: FAA TSO-C70a, Type I
Australia: CAA CAO 103.15
China: CAAC-AAD
Europe: EASA ETSO 2C70a, Type I
Germany: LBA 40.320
Japan: JCAB CARJ Article 152
Canada: 6500-18-14 (C) (AARCBF)


Color Tube: Yellow Canopy: Fluorescent Orange Carrying Case: Yellow
Diameter Raft Tube 16.25" (41.28cm)
Inflated Volume: @ 1.50 psig

Tube 1: 75.2 ft³ (2.13 m³)
Tube 2: 75.2 ft³ (2.13 m³)
Total: 150.4 ft³ (4.259 m³)

Tube Volume Per Person: @ rated capacity 3.27 ft³ (0.0926 m³)
Total Tube Buoyancy 9422 lbs. (4274 kg)
Buoyancy Per Person: @ rated capacity 204.8 lbs. (92.91 kg)
Total Deck Area 166 ft² (15.4 m²)
Deck Area Per Person: @ rated capacity 3.61 ft² (0.335 m²)
Tube Operating Pressure

Minimum: 1.5 psig (0.10 bar)
Nominal: 2.0 psig (0.14 bar)
Maximum: 3.0 psig (0.21 bar)

Pressure Relief Valves

R0202A3XX:
Open: 2.5-2.7 psig (0.17-0.19 bar)
Close: 2.1-2.4 psig (0.14-0.17 bar)

Tube Burst Pressure Over 6 psig (0.4 bar)
Inflation System

R0202A2XX:
Cylinder Size: 165 in³
Cylinder Type: DOT-3HT3000 & TC-3HTM207, Steel
Charge Pressure: 3000 psig
Charge Weights: CO₂ : 0.73 to 0.75 lbs. (0.33 to 0.34 kg)
Charge Weights: N₂ : 1.09 to 1.23 lbs. (0.494 to 0.558 kg)

R0202A3XX:
Cylinder Size: 110 in³
Cylinder Type: DOT-SP9894 4500 & TC-3HWM310, Steel
Charge Pressure: 4500 psig
Charge Weights: CO₂ : 2.15 to 2.17 lbs. (0.975 to 0.984 kg)
Charge Weights: N₂ : 2.60 to 2.65 lbs. (1.18 to 1.20 kg)

Environmental Limits
Temperature
Humidity

Up to 95% relative humidity

Altitude -2000 to 45,000 ft. above sea level
Service Life

Indefinite if raft continues to pass periodic maintenance inspection

Frequency Of Inspection

36 months from the date of manufacture for first maintenance inspection, every 36 months for subsequent inspections